Dry hop your Fermzilla with an inexpensive and a very effective dry hop device.
This stainless steel adaptor ball valve enables you to connect two PCO 1881 threads with a valve in between. Each side has an integrated O-ring that will seal on the neck of the PCO1881 Thread. The 20mm bore (approx.) makes it possible to put some dry hops into a Coke bottle or other soft drink bottle, attach it to the ball valve and use a closed loop to dry hop into your FermZilla Fermenter.
₹999.00
As show in the photo if you use this stainless ball valve in conjunction with the PCO 1881 Tee Piece and the Carbonation Cap, you will have the added advantage that you will be able to use CO2 gas to purge out oxygen from the hops before you dry hop.
Note – Dry hop pellets will require a bit of a shake to get them to fall through the 20mm
bore. If you tap the PET Coke bottle this should be enough to make the hops fall down into
the fermenter through the ball valve.
You must be logged in to post a review.
Reviews
There are no reviews yet.